Case Final Drives

(Prices are subject to change without notice.)

      Remanufactured Final Drives have new bearings and seals.

Hagan Tractor pays and arranges freight on return cores of this type.

Final Drive Order Form

Click images to enlarge.

Remanufactured Final Drives

Description	Fits	Price	Picture
Remanufactured Final Drive	Case 450 450B	With Top Pinion: $4,000.00 Exchange Core Charge $1,800.00	N/A
Remanufactured Final Drive	Case 450C	With Bevil Gear: $7,000.00 Exchange Core Charge $1,800.00
Remanufactured Final Drive	Case 550 550E	With Bevil Gear: $7,000.00 Exchange Core Charge $1,800.00
Remanufactured Final Drive	Case 550 550E WIDE TRACK	With Bevil Gear: $8,000.00 Exchange Core Charge $1,800.00	N/A
Remanufactured Final Drive	Case 850B 850C 850D	With Bevil Gear: $8,500.00 Exchange Core Charge $1,800.00	N/A
Remanufactured Final Drive	Case 850D 850E WIDE TRACK	With Bevil Gear: $9,000.00 Exchange Core Charge $1,800.00	N/A
Remanufactured Final Drive	Case 1450	With Top Pinion Shaft: $7,000.00 Exchange Core Charge $1,800.00
Remanufactured Final Drive	Case 1150B 1150C 1150D	With Top Pinion Shaft $7,000.00 Exchange Core Charge $1,800.00	N/A

Final Drive Parts

Part #s	Description	Fits	Price	Pictures
11832 11831	New Aftermarket Pinion with Used Coupling - SET 6 Splines Coupler has 6 splines on both ends approximately 2.25 inches long coupler is in good used condition	Case 310 May fit other machines	$60.00 per SET 1 SET available as of 12/26/2024 - Shelf J
G101530 G105733	New Aftermarket Final Drive Axle Shaft/Splined Shaft Have snap ring groove	Case 450 450B 450C 455B 455C 475	$700.00 Each Quantity of 4 available as of 4/26/2024 - SC4 & MS
G106950	Used Final Drive Axle Shaft LGP	Case 750H LGP 750H WT 850D LGP 850E LGP 850G LGP 850H LGP 850H WT 855D LGP 855E LGP	$2,000.00 Each Quantity of 1 available as of 11/5/2024 - SC4
G107897	New Aftermarket Final Drive Bevel Gear Shaft Bevel Gear Only!	Case Dozers	$540.00 Each Quantity of 4 available as of 11/10/2024 - FS
385239A2	Used Clutch Input Shaft	Case 650K 650K Series 2 Tier 2 650K Series 3 Tier 2 650L Tier 3 650M LT Tier 4B 650M WT Tier 4B 750K 750K Series 2 Tier 2 750K Series 3 Tier 2 750L Tier 3 750M LT Tier 4A 750M LT Tier 4B 750M WT/LGP Tier 4A 750M WT Tier 4B 850K 850K Series 2 Tier 2 850K Series 3 Tier 2 850L Tier 3 850M LT Tier 4A 850M LT Tier 4B 850M WT/LGP Tier 4A 850M WT Tier 4B Also fits some New Holland Machines	$100.00 Each Quantity of 1 available as of 5/29/2020 - SC2
385205A1	Used Retaining Plate	Case 650K Series 1 650K Series 2 Tier 2 650K Series 3 Tier 2 650L Tier 3 650M LT Tier 4B 650M WT Tier 4B 750K Series 1 750K Series 2 Tier 2 750L Tier 3 750M LT Tier 4A 750M LT Tier 4B 750M WT Tier 4B 750M WT/LGP Tier 4A 850K Series 1 850K Series 2 Tier 2 850K Series 3 Tier 2 850L Tier 3 850M LT Tier 4A 850M LT Tier 4B 850M WT Tier 4B 850M WT/LGP Tier 4A Also fits some New Holland Machines	$50.00 Each Quantity of 1 available as of 5/29/2020 - SC2
385246A4	Used Bearing Housing	Case 650K Series 1 650K Series 2 Tier 2 650K Series 3 Tier 2 650L Tier 3 650M LT Tier 4B 650M WT Tier 4B 750K Series I 750K Series 2 Tier 2 750L Tier 3 750M LT Tier 4A 750M LT Tier 4B 750M WT Tier 4B 750M WT/LGP Tier 4A 850K Series 1 850K Series 2 Tier 2 850K Series 3 Tier 2 850L Tier 3 850M LT Tier 4A 850M LT Tier 4B 850M WT Tier 4B 850M WT/LGP Tier 4A Also fits some New Holland Machines	$100.00 Each Quantity of 1 available as of 5/29/2020 - SC2
385243A2	Used Brake Plate	Case 650K Series 1 650K Series 2 Tier 2 650K Series 3 Tier 2 650L Tier 3 650M LT Tier 4B 650M WT Tier 4B 750K Series 1 750K Series 2 Tier 2 750L Tier 3 750M LT Tier 4A 750M LT Tier 4B 750M WT Tier 4B 750M WT/LGP Tier 4A 850K Series 1 850K Series 2 Tier 2 850K Series 3 Tier 2 850L Tier 3 850M LT Tier 4A 850M LT Tier 4B 850M WT Tier 4B 85M WT/LGP Tier 4A Also fits some New Holland Machines	$100.00 Each Quantity of 1 available as of 5/29/2020 - SC2
385248A2	Used Brake Plate	Case 650K Series 1 650K Series 2 Tier 2 650K Series 3 Tier 2 650L Tier 3 650M LT Tier 4B 650M WT Tier 4B 750K Series 1 750K Series 2 Tier 2 750L Tier 3 750M LT Tier 4A 750M LT Tier 4B 750M WT Tier 4B 750M WT/LGP Tier 4A 850K Series 1 850K Series 2 Tier 2 850K Series 3 Tier 2 850L Tier 3 850M LT Tier 4A 850M LT Tier 4B 850M WT Tier 4B 85M WT/LGP Tier 4A Also fits some New Holland Machines	$75.00 Each Quantity of 1 available as of 5/29/2020 - SC2
385276A1	Used Gear 67 Teeth	Case 650K Series 1 650K Series 2 Tier 2 650K Series 3 Tier 2 650L Tier 3 650M LT Tier 4B 650M WT Tier 4B 750K Series 1 750K Series 2 Tier 2 750L Tier 3 750M LT Tier 4A 750M LT Tier 4B 750M WT Tier 4B 750M WT/LGP Tier 4A 850K Series 1 850K Series 2 Tier 2 850K Series 3 Tier 2 850L Tier 3 850M LT Tier 4A 850M LT Tier 4B 850M WT Tier 4B 85M WT/LGP Tier 4A Also fits some New Holland Machines	$650.00 Each Quantity of 1 available as of 5/29/2020 - SC2
G103711	New Old Stock (NOS) Genuine Case OEM Final Drive Shaft Cover For Wide Track or LGP models New in original box. Box shows shelf wear and my have extra writing or stickers on it. Cover is new in bag.	Case 750H 850C 850D 850E 850G 850H 855C 855D 855E	$150.00 Each Quantity of 1 available as of 12/28/2020 - SC
G105822 G101599	New Old Stock (NOS) Genuine Case OEM Final Drive Cover Assembly/ Cover New - One without box - others in boxes. Boxes show shelf wear.	Case 450B 450C 455B 455C 550 550E 550G 550H 650 650G 650H 750H 850B 850C 850D 850E 850G 850H 855C 855D 855E	$100.00 Each Quantity of 4 available as of 12/28/2020 - SC
G105822 G101599	Used Final Drive Cover Assembly/ Cover Have been blasted on the outside.	Case 450B 450C 455B 455C 550 550E 550G 550H 650 650G 650H 750H 850B 850C 850D 850E 850G 850H 855C 855D 855E	$50.00 Each Option A & B available as of 2/21/2025 - SC
G100325	New or Used Final Drive Shaft Spacer Short Option A - New Aftermarket Option B - Used	Case 450B 450C 455B 455C 550 550E 550G 550H 650 650G 650H 750H 850B 850C 850D 850E 850G 850H 855C 855D 855E	Option A - $25.00 Each Limited Quantity available as of 9/9/2024 - Shelf J Option B - $20.00 Each Quantity of 2 available as of 4/2/2024 - Shelf J
G109013 G35217	Used OEM Top Pinion/ Pinion Shaft Has some water spots. See pictures	Case 1150B 1150C 1150D 1150E 1150G 1150H 1450 1450B 1455B	$250.00 Each Quantity of 1 available as of 6/28/2024 - SC4
A50143	Used OEM Top Pinion/ Pinion Shaft Has a few water spots. See picture	Case 450 450B 455B 475 750 850	$100.00 Each Sold - Finding Replacement - SC
A50475 A51504	Used Final Drive Sprocket Shaft Option B - the holes around the edge have been filled in and redrilled in new places	Case 850	$750.00 Each Option A & B available as of 10/13/2022 - SC
A50163	Used SET of 2 Interlocking Snap Rings	Case 850	$40.00 per SET 2 SETS available as of 10/12/2022 - SC
A50167	Used Bevel Gear Lock Nut / Pinion Nut	Case 450 450B 455B 475 750 850	$75.00 Each Quantity of 2 available as of 8/14/2024 - SC2
A50301	Used Axle Spacer/ Final Drive Shaft Pin	Case 850 after serial number 7073469	$25.00 Each Quantity of 2 available as of 8/17/2022 - SC
A30504	New Old Stock (NOS) Genuine Case OEM Bearing Snap Ring New in original bag. Removed from bag for picture only.	Case 450	$25.00 Each Quantity of 11 available as of 11/18/2024 - Shelf J
A50553	Used Face Seal Seat See picture for condition	Case 450 850 1150	Option A - $25.00 Each Option B - $50.00 Each Option A & B available as of 9/24/2024 - SC
A50405 A136860 Casting Number A50405	Used Final Drive Drop Cover/ Final Drive Cover	Case 450 475	$125.00 Each Quantity of 1 available as of 2/24/2022 - SC
A136860 Could have 978338 casting number	Used Final Drive Drop Cover/ Final Drive Cover See picture for condition	Case 450 450B 450C 455B 455C 475 550	$90.00 Each Option A & B available as of 9/24/2024 - SC
1348872C1	Used Final Drive Cover/ Bottom Cover Weighs 56 pounds	Case 1150E 1150G 1150H	$400.00 Each Quantity of 1 available as of 12/30/2024 - SC
1348875C2 1348875C1 Casting Number 976371	Used Final Drive Cover/ Lower Cover/ Bottom Cover Weighs 54 pounds	Case 650H 750H 850H	$400.00 Each Quantity of 2 available as of 4/2/2024 - SC4
A50140	Used Final Drive Shaft Cover	Case 450 450B 450C 455B 455C 475 750 850	$50.00 Each Quantity of 1 available as of 7/28/2022 - SC
A50453 A50573 70278	Used Pinion Shaft Bearing Cap/ Final Drive Cover	Case 1150 800 1000 1000C 1000D	$75.00 Each Quantity of 3 available as of 7/5/2022 - SC
70280 A50454	Used Output Shaft Bearing Cap/ Fitting	Case 1150 800 1000 1000C 1000D	$20.00 Each Option A & B available as of 7/5/2022 - SC
360375A1 360377A1	Used Shim Option A - 360377A1 - .020 thick Option B - 360375A1 - .005 thick	Case 650H 750H 850H	$25.00 Each Option A & B available as of 4/2/2024 - SC4
329859A1	Used OEM Bull Gear / Final Drive Gear 86 Teeth	Case 650H 750H 850H	$5,000.00 Each Quantity of 2 available as of 4/2/2024 - SC4
329883A1	Used Final Drive Shaft/ Axle Shaft Weight - 51 pounds	Case 650H 750H 850H	$2,000.00 Each Quantity of 2 available as of 4/3/2024 - SC4
T20669	Used Bearing Housing without Bearing/ Cap/ Cover	John Deere 450 450B 450C 450D 450E + other machines	$75.00 Each Quantity of 1 available as of 4/25/205 - SC4
T31999	Used Drive Shaft 12 Teeth 23 Splines	John Deere 450B 450C 450D 450E + other machines	$100.00 Each Option A & B available as of 3/22/2024 - SC4
T32001	Used Bushing	John Deere 450B 450C 450D 450E + other machines	$10.00 Each Option A & B available as of 3/22/2024 - SC4
T32003 T81050	Used Inner Bearing Spacer	John Deere 450B 450C 450D + other machines	$15.00 Each Quantity of 1 available as of 12/5/2024 - SC4
T32005	Used Cap/Cover	John Deere 450B 450C 450D 450E + other machines	$75.00 Each Option A & B available as of 3/22/2024 - SC4
T112137 T161934 T32002	Used Bull Gear/ Final Drive Gear 68 Teeth 25 Splines	John Deere 450B 450C	$600.00 Each Quantity of 1 available as of 3/25/2024 - SC4
T61032	Used Spindle 25 Teeth/Splines	John Deere 450B 450C 550 555	$450.00 Each Quantity of 1 available as of 3/25/2024 - SC4
T68003	Used Spindle 64 Teeth/Splines	John Deere 450C 550 555	$200.00 Each Quantity of 1 available as of 3/25/2024 - SC4
622247C2	Used Axle Shaft	International/Dresser TD7E may fit other machines	$1,000.00 Each Quantity of 3 available as of 6/27/2024 - SC4
621109C2	Used Bull Gear/ Final Drive Gear 68 Teeth 36 Splines	International/Dresser TD7E May fit other machines	$900.00 Each Quantity of 1 available as of 6/20/2024 - SC4
705325C1 716899C1 Casting Number ends 4435C1	Used Right Hand Final Drive Bottom Cover/ Drop Cover	International/Dresser TD7E May fit other machines	$300.00 Each Quantity of 1 available as of 6/21/2024 - SC4
621111C1	Used Top Pinion good used	International/Dresser TD7E May fit other machines	$175.00 Each Quantity of 1 available as of 6/20/2024 - SC4
621104C1	Used Final Drive Cover/ Cap	International/Dresser TD7E May fit other machines	$75.00 Each Quantity of 2 available as of 6/21/2024 - SC4
306897R1	Used Final Drive Cover/ Cap	International/Dressser TD9B May fit other machines	$50.00 Each Quantity of 1 available as of 7/15/2022 - SC
D32723	Used Final Drive Shaft Spacer	Case 310 310F 310G 350 350B	$10.00 Each Quantity of 2 available as of 6/2/2023 - SC
D43356	Used Seal Retainer	Case 310G 350 350B	$100.00 Each Quantity of 4 available as of 3/15/2023 - SC
G100328	Used Bevel Gear Shim .005 thick	Case 450C 455C 550 550E 550G 550H 650 650G 650H 750H 850B 850C 850D 850E 850G 850H 855C 855D 855E	$3.00 Each Quantity of 2 available as of 4/3/2024 - SC4
G100329	Used Bevel Gear Shim .007 thick	Case 450C 455C 550 550E 550G 550H 650 650G 650H 750H 850B 850C 850D 850E 850G 850H 855C 855D 855E	$3.00 Each Quantity of 4 available as of 4/3/2024 - SC4
G100330	Used Bevel Gear Shim .020 thick	Case 450C 455C 550 550E 550G 550H 650 650G 650H 750H 850B 850C 850D 850E 850G 850H 855C 855D 855E	$3.00 Each Quantity of 3 available as of 4/3/2024 - SC4
R21741	Used Bearing Shim .005 thick	Case 450B 450C 455B 455C 475 550 550E 550G 550H 650 650G 650H 750H 850B 850C 850D 850E 850G 850H 855C 855D 855E 1150 1450 1450B 1455B 1000 1000D	$5.00 Each Quantity of 2 available as of 4/3/2024 - SC4
R21742	Used Bearing Shim .007 thick	Case 450B 450C 455B 455C 475 550 550E 550G 550H 650 650G 650H 750H 850B 850C 850D 850E 850G 850H 855C 855D 855E 1150 1450 1450B 1455B 1000 1000D	$3.00 Each Quantity of 5 available as of 4/3/2024 - SC4
R21743	Used Bearing Shim .020 thick	Case 450B 450C 455B 455C 475 550 550E 550G 550H 650 650G 650H 750H 850B 850C 850D 850E 850G 850H 855C 855D 855E 1150 1450 1450B 1455B 1000 1000D	$3.00 Each Quantity of 7 available as of 4/3/2024 - SC4
1997099C1	Used Bearing Retainer Plate / Axle Plate	Case 550 550E 550G 550H 650G 650H 750H 850E 850G 850H 855E	$100.00 Each Option A & B available as of 4/15/2025 - SC
1997100C1	Used Bevel Gear Bearing Retaining Plate	Case 550 550E 550G 550H 650G 650H 750H 850E 850G 850H 855E	$75.00 Each Option A & B available as of 2/21/2025 - SC
436723A1	Used Support Assembly Have been blasted and primed	Case 650K 750K 750L 850K 850L	$150.00 Each Option A & B available as of 5/7/2021 - SC3
T105458	Used OEM Pinion Gear 22 Teeth	John Deere 450G 550G 650G + other machines	$350.00 Each Option A & B available as of 3/15/2024 - SC4

Part numbers are provided for reference only.

Many of our products are NEW AFTERMARKET.